Feb 10, 2023 Leave a message

Brief analysis of the production process and process of crown caps

Crown cap is one of the indispensable packaging products in the liquor product packaging industry, although the crown cap is small, the role can not be underestimated. In the packaging of the product, the main function of the crown cap is to seal and block. The crown bottle cap can not only seal the wine products to prevent the alcohol in the liquor from volatilizing to the air, but also effectively play a blocking role in the liquor and the outside world, prevent the outside air or debris from eroding or polluting employment, ensuring the quality of the wine product and the shelf life of the wine product. In addition, for its packaging beauty, although the crown cap is small but plays a finishing role in the whole package, a good crown cap can add color to the entire package, lift.


With the two-way development of economy and technology, the sales volume of China's liquor industry is also growing rapidly, crown bottle caps as an indispensable product in its packaging process, the application is also extensive, and its market demand is also constantly rectified. A number of crown cap manufacturers have also begun to emerge, bringing vitality to the entire market while also winning the fierce market competition. If a wine bottle manufacturer wants to obtain good economic benefits and do a good job in the development of the enterprise itself, it must stand out in the severe industry competition situation, open the market with its own strength, and stand firm.


The development of science and technology makes everything in constant development and change, crown caps are the same, the crown caps on the market are no longer the national shape and model, to a variety of shapes, types and different common crown caps have appeared in the market, exuding their own charm. Only by continuous innovation and research and development of new products and types can the manufacturer of wine bottles keep up with the pace of the times and not be eliminated.

 

face sides of crown cap for beer bottle

 

The adhesion of PVC adhesive pad to the crown cap inner coating (adhesive) should be good
1. The injection temperature is unstable; 2. The adhesive performance is not good; 3. The performance of PVC raw materials is poor.
These three aspects are the main reasons for affecting whether the injection molding pad is warped. In addition, the lack of injection molding material will seriously affect the tightness of the bottle mouth; According to the process requirements, the weight of the normal single rubber pad (0.35±0.02g) should be strictly controlled during production operations. During the quality control inspection, 10~20 sample caps can be arbitrarily taken for weighing, and weighed again after carefully peeling off the rubber pad with bamboo skewers, etc., and the average value of the difference in the weight of the two caps can be taken to 0.01g.


In short, several technical indicators that should be paid attention to in the production process of crown bottle caps are:
1. The appearance quality shall not have obvious paint peeling, burrs at the skirt, etc.;
2. The process size should meet the size requirements and use requirements of the crown cap;
3. PVC rubber pad should be injection molding complete and have good adhesion; The weight of the rubber pad should be consistent;
4. Corrosion resistance. (The sample cap was taken out and washed after stirring in a concentrated HCl solution dissolved with CuSO4 for 30s to observe whether there were obvious rust spots on the surface of the crown bottle cap).
Only by having a comprehensive understanding and understanding of the printing and coating process and capping process of crown caps can we make corresponding adjustments to find the reasons for each link when different quality defects occur, and product quality will be guaranteed.

 

Send Inquiry

Home

Phone

E-mail

Inquiry